Single layer polypropylene nano-fiber filter cartridge (JPP) series

Short Description:

JPP series of is improved on HPP, adopts imported polypropylene nano-fiber membrane. Microfiber, good dispersity, special fiber structure, make it has characteristic of high precision and low cost; high quantity of pollutant received, make sure long lifetime; very good resistance of acid, alkali and chemical solvent. Widely used for pre-filtration in pharmaceutical, fine chemical, food&beverage and water purification. Typical Application Filtration of acid and alkali liquor; Pre-filtratio...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 10 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: hanghai,Ningbo,Qingdao,Shenzhen
  • Payment Terms: T/T,L/C,PAYPAL,WESTERN UNION
  • Product Detail

    Product Tags

    JPP series of is improved on HPP, adopts imported polypropylene nano-fiber membrane. Microfiber, good dispersity, special fiber structure, make it has characteristic of high precision and low cost; high quantity of pollutant received, make sure long lifetime; very good resistance of acid, alkali and chemical solvent. Widely used for pre-filtration in pharmaceutical, fine chemical, food&beverage and water purification.

    Typical Application

    Filtration of acid and alkali liquor;

    Pre-filtration of chemical intermediate;

    Pre-filtration of SVP and LVP;

    Pre-filtration of biological products;

    Pre-filtration of beverage and wine;

    Prefiltration of freeze-dried powder;

    Pre-filtration of high purity chemical reagent;

    Cartridge filter of water treatment;

    Pre-filtration of craft water;

    Clarification of beverage&wine;

    Features

    Good particles interception efficiency≥99%;

    Excellent chemical stability;

    Super high quantity of pollutant received, long lifetime;

    85℃ hot flow water sterilization;

    Material structure

    Filter media: Imported Polypropylene nano-fiber membrane;

    Diversion layer:Polypropylene fiber

    Central tube: Polypropylene, strengthen heat resistance liner;

    Shell/End cap: Polypropylene

    Seal ring: Silicone rubber/EPDM/fluorous/outer terafluoroethylene rubber

    Filter Area:≥0.70m2@ø69, 10”

    Operation condition

    Max temperature:

    A: normal Polypropylene shell and center tube,≤60℃

    B: Polypropylene shell&socket liner,≤80℃

    Max differential pressure: Positive pressure difference 4bar@23℃

                         Reverse pressure difference 2bar@23℃

    30

    31

    Ordering Information

    JPP    Precision         Up end Cap                           Length
    0010=0.1um          Z=Cylindrical sharp corner                 25=2.5”
    0022=0.22um           S=Triangular fin                        05=5”
    0045=0.45um           P=Bulkhead                           10=10”
    0065=0.65um           LP=Two flat port                       20=20”
    0100=1.0um             LHP=Two flat steel liner                  30=30”
    0300=3.0um             PLP=One flat port one bulkhead           40=40  
    0500=5.0um            G=Heat resistance type
    0800=8.0um                    
    1000=10.0um
    2000=20.0um                 
    3000=30.0um
    5000=50.0um
    100k=100um
    Central tube                   Down port                Seal ring     
           Default=PP      D=226 normal                          S=Silicone rubber
          H=Stainless steel  E=226 normal               V=Fluorine rubber
    T=Strengthen heat resistance liner DH=222 Outer steel ring Y=EPDM rubber
                           EH=226 Outer steel ring                   F=NBR
                           AD=222 special            WV=Outer terafluoroethylene rubber
                           AE=226 special
                           C=215 normal
                     F=220 normal
                   DN=220 Inner steel liner
                   EN=226 inner steel liner

     


  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !