Professional Design Sintering titanium filter (SGMZ) series to Slovenia Manufacturer
Professional Design Sintering titanium filter (SGMZ) series to Slovenia Manufacturer Detail:
0500=5.0um0050=0.5umTGA series filter, adopt high-purity titanium powder as raw material, sinteredand mechanical welded under high temperature with excellent resistance of high temperature, pressure and corrosion. Meantime it can be cleaned repeatly, make sure the low cost. Especially suitable for solid-liquid separate filtration of low viscosity liquid with rigidity particles.
Filtration of Acid and Alkali liquor;
Filtration of strong proton polarity solution;
Filtration of liquid with high temperature and high pressure;
Repeat cleaning, long lifetime;
Excellent chemical stability;
Good resistant of high pressure, temperature and corrosion;
High mechanical strength;
Filter media: High purity titanium
Port: Stainless steel
Seal ring: silicone rubber/EPDM/fluorous rubber/Outer tetrafluoroethylene rubber
Medicine and food liquid: Hot water immersion, Ultrasonic cleaning, hot steam washing, hydrolysis, scrub, compressed air purging;
Chemical and high viscosity fluid: Solvent dipping, Ultrasonic cleaning, high pressure water cleaning, Acid/alkali cleaning, boiled water washing;
|Normal Precision||Port||Seal ring|
|0050=0.5um||M20=male thread 20||Default=none|
|0100=1.0um||M30=male thread 30||S=Silicone rubber|
|0500=5.0um||M36=male thread 36||V=Fluorine rubber|
|5000=50um||C=ss215||WV=Outer terafluoroethylene rubber|
Product detail pictures:
Related Product Guide:
Water Filter Cartridge and Choosing the Right Water Filtration System
Get to Know the Water Filter Cartridge
Using a complete scientific top quality management program, great high-quality and fantastic religion, we win great track record and occupied this area for Professional Design Sintering titanium filter (SGMZ) series to Slovenia Manufacturer, The product will supply to all over the world, such as: India , Bhutan , Luxemburg , We strive for excellence, constant improvement and innovation, is committed to make us the "customer trust" and the "first choice of engineering machinery accessories brand" suppliers. Choose us, sharing a win-win situation!
We show how to purify aluminum nitrate and strontium nitrate by recrystallization. This is important because those two substances must be extremely pure for our upcoming video on making glow in the dark powder.
First make aluminum nitrate from our previous video: http://www.youtube.com/watch?v=u4Ha1SJrazY
Dissolve the dry aluminum nitrate in water and filter off any insoluble materials. We could not filter it off before it dried in the previous video because the particles at that stage are much too small. It needs crystallize once to aggregate into particles large that can be filtered.
After filtering, dry off the aluminum nitrate. The desiccator bag might be useful here: http://www.youtube.com/watch?v=XJFfS_YbbYI
After drying, carefully weigh out the crystals. Then take that mass and add in 20% mass of water. So if you have 50g like me, you add 10g of water (or 10mL since density is 1g/mL).
It won’t all dissolve, so carefully heat the mixture until it dissolves. Then cover it and let it cool down. Eventually it’ll crystallize out purer crystals.
After the mixture cools to room temperature, and left for a few hours. The liquid is poured off and discarded, it has the impurities and is not needed.
The crystals are again weighed and once again they are recrystallized with 20% water.
Once this is done. Dry the final product. I started with 50g and ended up with 17g. But now it’s very pure. Better than 99%
Strontium nitrate also needs to be purified. But it’s solubility doesn’t change that much with temperature so we’ll have to purify by slow evaporation recrystallization rather than thermal cycle recrystallization.
First, make strontium nitrate like our previous video: http://www.youtube.com/watch?v=_rd8b6wNnKA
Once again, dissolve it in water and filter it. Then let it crystallize. But before it dries completely, let the liquid reduce to about 20% of it’s saturated volume. So I started with a saturated solution of 10mL of strontium nitrate, i then waited until it evaporated down to 2mL of fluid. The crystals are not included in this assessment. Then discard the liquid. Repeat the recrystallization process.
Once again, use the desiccator bag to obtain extremely dry chemicals.
We are now ready to produce glow-in-the-dark powder.
By Elsie from Greenland - 2016.08.21 14:13
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Eileen from Saudi Arabia - 2016.03.28 12:22