Good quality 100% Single layer PES pleated filter cartridge (DHPS) Series for Karachi Importers

This series of cartridge adopt imported Germany special structure design micro PES membrane without support, with remarkable features of higher flux, higher aperture ratio, highly asymmetric pore structure form etc.

Every cartridge is integrity tested before delivery, can be widely used for terminal filtration in biological pharmaceutical, fine chemical, food and beverage industry.

Typical application

Sterile filtration of LVP and SVP;

Sterile filtration of Biological products;

Sterile filtration of beverage and wine series;

Sterile filtration of Freeze-dried powder;

Sterile filtration of pure water&mineral water;

Refine filtration of high purity chemical reagent;

Features

High asymmetric, higher aperture ratio, higher capacity pollutant;

Excellent hydrophilic, easy to wet, make integrity test before and after using;

Higher flux, ensure the economical operation of filter;

Low diffusion flow;uniform aperture, ensure the safety of the terminal;

Good heat stability, make it has good steam sterilization tolerance;

Material structure

Filter media: Asymmetric pore structure PES micro membrane;

Diversion layer:Polypropylene fiber

Central tube: Polypropylene, strengthen heat resistance liner;

Shell/End cap: Polypropylene

Seal ring: Silicone rubber/EPDM/fluorous/outer terafluoroethylene rubber

Filter Area:Filter Area:≥0.60m2@ø69, 10”

Operation condition

Max temperature:

A: normal Polypropylene shell and center tube,≤65℃

B: Polypropylene shell&socket liner,≤80℃

C: high molecular weight Polypropylene shell&strengthen heat resistance liner tube&socket liner, ≤90℃

Max differential pressure: Positive pressure difference 4bar@23℃

                     Reverse pressure difference 2bar@23℃

Steam sterilization:121℃ for 30 minutes

Ordering information