Factory source manufacturing Single layer Polypropylene fiber pleated low cost high efficiency pre-filter cartridge (HPP) series to Tanzania Manufacturer

Short Description:

HPP series of cartridge adopt polypropylene melt blown membrane. Low cost and high efficiency, with high flux and long lifetime. Very good resistance of acid, alkali and chemical solvents. Widely used for pre-filtering in pharmaceutical, fine chemical and food&beverage.   Typical Application Filtration of Acid and Alkali liquor; Pre-filtration of chemical intermediate; Pre-filtration of SVP and LVP; Pre-filtration of biological products; Pre-filtration of beverage and wine; Prefiltration ...


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for Imported PTFE Filter Cartridge , Security filter housing , Venting Use Filter Cartridge , We are also frequently hunting to determine relationship with new suppliers to deliver impressive and good option to our valued buyers.
Factory source manufacturing Single layer Polypropylene fiber pleated low cost high efficiency pre-filter cartridge (HPP) series to Tanzania Manufacturer Detail:

HPP series of cartridge adopt polypropylene melt blown membrane. Low cost and high efficiency, with high flux and long lifetime. Very good resistance of acid, alkali and chemical solvents. Widely used for pre-filtering in pharmaceutical, fine chemical and food&beverage.

 

Typical Application

Filtration of Acid and Alkali liquor;

Pre-filtration of chemical intermediate;

Pre-filtration of SVP and LVP;

Pre-filtration of biological products;

Pre-filtration of beverage and wine;

Prefiltration of freeze-dried powder;

Pre-filtration of high purity chemical reagent;

Cartridge filter of water treatment;

Pre-filtration of craft water;

Clarification of beverage&wine;

 

Features

Good particles interception efficiency>=85%;

Excellent chemical stability;

High flux, high capacity pollutant, long lifetime;

85℃ hot water sterilization;

 

Material structure

Filter media: Polypropylene melt blown membrane;

Diversion layer:Polypropylene fiber

Central tube: Polypropylene, strengthen heat resistance liner;

Shell/End cap: Polypropylene

Seal ring: Silicone rubber/EPDM/fluorous/outer terafluoroethylene rubber

Filter Area:≥0.60m2@ø69, 10”

 

Operation condition

Max temperature:

A: normal Polypropylene shell and center tube,≤60℃

B: Polypropylene shell&socket liner,≤80℃

Max differential pressure: Positive pressure difference 4bar@23℃

                     Reverse pressure difference 2bar@23℃

25

26

Ordering Information

HPP    Precision         Up end Cap                           Length
0010=0.1um          Z=Cylindrical sharp corner                 25=2.5”
0022=0.22um           S=Triangular fin                        05=5”
0045=0.45um           P=Bulkhead                           10=10”
0065=0.65um           LP=Two flat port                       20=20”
0100=1.0um             LHP=Two flat steel liner                  30=30”
0300=3.0um
0500=5.0um
0800=8.0um                    PLP=One flat port one bulkhead           40=40”
1000=10.0um
2000=20.0um                  G=Heat resistance type
3000=30.0um
5000=50.0um
100k=100.0um

 

Central tube                   Down port                Seal ring     
Default=PP                 D=226 normal                         S=Silicone rubber
H=Stainless steel            E=226 normal                         V=Fluorine rubber
T=Strengthen heat resistance liner DH=222 Outer steel ring              Y=EPDM rubber
                         EH=226 Outer steel ring                      F=NBR
                 AD=222 special                 WV=Outer terafluoroethylene rubber
               AE=226 special
               C=215 normal
               F=220 normal
               DN=220 Inner steel liner
               EN=226 inner steel liner

 


Product detail pictures:

Factory source manufacturing
 Single layer Polypropylene fiber pleated low cost high efficiency pre-filter cartridge (HPP) series to Tanzania Manufacturer detail pictures


Related Product Guide:
Water Filter Cartridge and Choosing the Right Water Filtration System
Auto Cabin Air Filter – Does Your Car Have One?

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Factory source manufacturing Single layer Polypropylene fiber pleated low cost high efficiency pre-filter cartridge (HPP) series to Tanzania Manufacturer, The product will supply to all over the world, such as: Turkey , luzern , Jordan , If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!


  • Germanium hemicylindrical prism, custom optics sales@dmphotonics.com

    Del Mar Photonics featured customer Dennis Hore writes:
    Our group works to characterize the interaction of biomolecules with solid surfaces. Nature designs proteins with well-defined structures
    in solution. The conformation of these molecules may serve a structural purpose, or a chemical one in the case of enzymes. In order to further the progress of technologies that immobilize such molecules on synthetic surfaces (like biosensors employing enzymes), it is important to have a detailed understanding and control of the interactions of these molecules with the surface.

    We use a variety of optical techniques along with computer modeling to achieve such a detailed molecular-level understanding. One of the
    optical methods employed in our lab is a nonlinear technique: visible-infrared sum-frequency generation spectroscopy. Here a fixed-wavelength visible (532 nm) and tunable-infrared (2-10 microns) laser are spatially- and temporally-overlapped at the solid-solution interface under investigation. Under the right symmetry conditions, new photons are created with a frequency that corresponds to the sum of the two incident frequencies. We then characterize this new beam to work back towards the structure of the interface, which in turn provides information on the adsorbed biomolecular structure. A practical aspect of this experiment is that sample optics must be transparent in the visible, and throughout the mid-infrared region.
    For this we use calcium fluoride (CaF2) prisms. Del Mar Photonics has provided high-quality prisms with custom shapes according to our drawings. One of the photos shows a close-up view of our sample cell. It is an aluminum block with internal plumbing for circulating water to maintain a constant temperature for the experiment. Inside this block there is a teflon cell that contains the analyte solution. An o-ring on the face of the cell interfaces to a CaF2 prism which forms the prism-solution (solid-liquid) interface on which the biomolecules are adsorbed. In the photo, one can see a hemi-cylindrical CaF2 prism in place. This allows the visible and infrared beams to be incident at any angle, while maintaining a horizontal plane-of-incidence.
    Del Mar has been able to manufacture all shapes of prisms from CaF2, fused silica, and ZnSe according to our custom specifications.
    Other examples:
    Type: hemicylindrical prism – request a quote
    Material: IR grade CaF2
    Length/Diameter: 20 mm (+/-0.1 mm)
    Width: 13 mm (+/-0.1 mm)
    Radius/Height: 12.7 mm (+/-0.1 mm)
    Angular deviation: +/-3 arc minutes
    2 faces polished (20 x 13 mm and convex surface):
    Surface quality: 60-40 scr-dig
    Other faces: fine ground.
    Coating: none

    Type: hemicylindrical prism – request a quote
    Material: IR grade Fused Silica
    Length/Diameter: 20 mm (+/-0.1 mm)
    Width: 13 mm (+/-0.1 mm)
    Radius/Height: 12.7 mm (+/-0.1 mm)
    Angular deviation: +/-3 arc minutes
    2 faces polished (20 x 13 mm and convex surface):
    Surface quality: 60-40 scr-dig
    Other faces: fine ground.
    Coating: none

    Part number: ZnSe_hemicyl_prism_25.4_12.7 – request a quote
    Type: hemicylindrical prisms
    Material: ZnSe optical grade
    Height 25.4 mm (+/-0.2 mm),
    Radius: 12.7 mm (+0.0/-0.2 mm)
    Center thickness: 12.7 mm (+/-0.1mm)
    Angular deviation: +/-3 arc min,
    2 faces polished: SQ 60-40 scr-dig
    Other faces: fine ground.
    Coating: none

    Part number: FS_hemicyl_prism_25.4_12.7 – request a quote
    Type: hemicylindrical prisms
    Material: Fused Silica
    Height 25.4 mm (+/-0.2 mm),
    Radius: 12.7 mm (+0.0/-0.2 mm)
    Center thickness: 12.7 mm (+/-0.1mm)
    Angular deviation: +/-3 arc min,
    2 faces polished: SQ 60-40 scr-dig
    Other faces: fine ground.
    Coating: none

    Precision Optics & Optical Systems
    Lenses, prisms, windows, beamsplitters,
    polarizers, mirrors, cylindrical optics etc.
    UV grade fused silica, CaF2, MgF2, BaF2, LiF, NaCl
    Ge, ZnSe, Si, crystal quartz, BK-7 Glass, Sapphire, Calcite, Astrosital, Thallium Halogenide
    Narrow-Band Holographic Filters
    Diffraction and Aspherical Optical Elements
    High Power Variable Attenuators
    Near-IR Viewers

    absorption region thickness, electrooptic technology, optical commutator, detection range capability, radiance contrast, various jet engines, pump beam diameter, using optical technology, domain detectors, peak radiation wavelength, most critical performance parameter, spectral radiant exitance, high mechanical integrity, precision weapon delivery, photonic sensors, critical performance parameters, thermal blooming, peak radiation intensity, severe operating environments, radiance level, critical performance requirements, optic size, high detection probability, afterburner operation, spectral radiant emittance



    To take one of our classes, visit us at www.rxprostaff.net. This video is intended for Pharmacists and Pharmacy Technicians participating in an ACPE-Accredited Sterile Compounding training program. This video shows the procedure for cleaning a Horizontal Air-Flow Hood.

    This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
    5 Stars By Caroline from Singapore - 2015.02.04 14:13
    High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Cherry from Guyana - 2016.09.26 12:12

    Related Products

    WhatsApp Online Chat !