Cheapest Price Single layer Nylon-6 pleated low cost high efficiency sterile filter cartridge (HNY) series to Hamburg Factory
Cheapest Price Single layer Nylon-6 pleated low cost high efficiency sterile filter cartridge (HNY) series to Hamburg Factory Detail:
HNY series of cartridge adopt NY-6 micro membrane, with excellent natural hydrophilic and positive charge. High vido ratio, high flux, resistance of fat type organic solvent and high PH liquor. Widely used for terminal filtration in pharmaceutical, fine chemistry, food&beverage.
Every cartridge is integrity tested before delivery.
Sterile filtration of LVP and SVP;
Sterile filtration of Beverage and wine;
Fine filtration of high purity aliphatic chemical solvent;
Sterile filtration of pure water&mineral water;
Excellent natural hydrophilic,
Easy to be wet, convenient for integrity test;
Small fluid resistance, high flux, long lifetime;
Low cost, high efficiency sterilization;
Good heat stability, ensure good steam sterilization effect;
Filter media: Nylon-6 micro membrane;
Diversion layer:Polypropylene fiber
Central tube: Polypropylene, strengthen heat resistance liner;
Shell/End cap: Polypropylene
Seal ring: Silicone rubber/EPDM/fluorous/outer terafluoroethylene rubber
Filter Area:≥0.60m2@ø69, 10”
A: normal Polypropylene shell and center tube,≤65℃
B: Polypropylene shell&socket liner,≤80℃
C: high molecular weight Polypropylene shell&strengthen heat resistance liner tube&socket liner, ≤90℃
Max differential pressure: Positive pressure difference 4bar@23℃
Reverse pressure difference 2bar@23℃
Steam sterilization:121℃ for 30 minutes
|HNY Precision Up end Cap Length|
|0010=0.1um Z=Cylindrical sharp corner 25=2.5”|
|0022=0.22um S=Triangular fin 05=5”|
|0045=0.45um P=Bulkhead 10=10”|
|0065=0.65um LP=Two flat port 20=20”|
|0080=0.8um LHP=Two flat steel liner 30=30”|
|0100=1.0um PLP=One flat port one bulkhead 40=40”|
|G=Heat resistance type|
|Central tube Down port Seal ring|
|Default=PP D=226 normal S=Silicone rubber|
|H=Stainless steel E=226 normal V=Fluorine rubber|
|T=Strengthen heat resistance liner DH=222 Outer steel ring Y=EPDM rubber|
|EH=226 Outer steel ring F=NBR|
|AD=222 special WV=Outer terafluoroethylene rubber|
|DN=220 Inner steel liner|
|EN=226 inner steel liner|
Product detail pictures:
Related Product Guide:
Water Filter Cartridge and Choosing the Right Water Filtration System
Basic Functions of a Water Filter Cartridge
We goal to understand excellent disfigurement from the manufacturing and supply the top support to domestic and abroad clients wholeheartedly for Cheapest Price Single layer Nylon-6 pleated low cost high efficiency sterile filter cartridge (HNY) series to Hamburg Factory, The product will supply to all over the world, such as: Russia , Brunei , Melbourne , Our factory insists on the principle of "Quality First, Sustainable Development", and takes "Honest Business, Mutual Benefits" as our developable goal. All members sincerely thanks for all old and new customers' support. We will keep working hard and offering you the highest-quality products and service.Thanks.
This video provides some tips on changing the in cabin micro air filter on the 2003 Infiniti QX4.SUV. Two filters are required and suggested replacement is every 15,000 miles. This video shows the dirt level after 57,655 miles.
Filters were purchased from amazon for $9.61 each. Part # is W01331727008NPN and the filters used in the video for replacement are made by NPN.
I had been putting this job off, because it required removing the lower dash, but it actually wasn’t all that difficult in the end (it’s just a little confusing when you see the pictures in the shop manual, because it’s somewhat unclear where exactly the cabin filters are located). Hopefully this video will be of help to anyone doing this job on a QX4 in the future.
By Rose from Saudi Arabia - 2015.09.23 18:44
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Alice from Karachi - 2015.07.12 12:19