2017 Latest Design Single layer PES pleated filter cartridge (DHPS) Series to Colombia Manufacturers
2017 Latest Design Single layer PES pleated filter cartridge (DHPS) Series to Colombia Manufacturers Detail:
This series of cartridge adopt imported Germany special structure design micro PES membrane without support, with remarkable features of higher flux, higher aperture ratio, highly asymmetric pore structure form etc.
Every cartridge is integrity tested before delivery, can be widely used for terminal filtration in biological pharmaceutical, fine chemical, food and beverage industry.
Sterile filtration of LVP and SVP;
Sterile filtration of Biological products;
Sterile filtration of beverage and wine series;
Sterile filtration of Freeze-dried powder;
Sterile filtration of pure water&mineral water;
Refine filtration of high purity chemical reagent;
High asymmetric, higher aperture ratio, higher capacity pollutant;
Excellent hydrophilic, easy to wet, make integrity test before and after using;
Higher flux, ensure the economical operation of filter;
Low diffusion flow;uniform aperture, ensure the safety of the terminal;
Good heat stability, make it has good steam sterilization tolerance;
Filter media: Asymmetric pore structure PES micro membrane;
Diversion layer:Polypropylene fiber
Central tube: Polypropylene, strengthen heat resistance liner;
Shell/End cap: Polypropylene
Seal ring: Silicone rubber/EPDM/fluorous/outer terafluoroethylene rubber
Filter Area:Filter Area:≥0.60m2@ø69, 10”
A: normal Polypropylene shell and center tube,≤65℃
B: Polypropylene shell&socket liner,≤80℃
C: high molecular weight Polypropylene shell&strengthen heat resistance liner tube&socket liner, ≤90℃
Max differential pressure: Positive pressure difference 4bar@23℃
Reverse pressure difference 2bar@23℃
Steam sterilization:121℃ for 30 minutes
|DHPS Precision Up end Cap Length|
|0010=0.1um Z=Cylindrical sharp corner 25=2.5”|
|0022=0.22um S=Triangular fin 05=5”|
|0045=0.45um P=Bulkhead 10=10”|
|0065=0.65um LP=Two flat port 20=20”|
|0080=0.8um LHP=Two flat steel liner 30=30”|
|0100=1.0um PLP=One flat port one bulkhead 40=40”|
|0120=1.2um G=Heat resistance type|
|Central tube Down port Seal ring|
|Default=PP D=226 normal S=Silicone rubber|
|H=Stainless steel E=226 normal V=Fluorine rubber|
|T=Strengthen heat resistance liner DH=222 Outer steel ring Y=EPDM rubber|
|EH=226 Outer steel ring F=NBR|
|AD=222 special WV=Outer terafluoroethylene rubber|
|DN=220 Inner steel liner|
|EN=226 inner steel liner|
Product detail pictures:
Related Product Guide:
Auto Cabin Air Filter – Does Your Car Have One?
Water Filter Cartridge and Choosing the Right Water Filtration System
The organization upholds the philosophy of "Be No.1 in good quality, be rooted on credit history and trustworthiness for growth", will keep on to provide previous and new customers from home and overseas whole-heatedly for 2017 Latest Design Single layer PES pleated filter cartridge (DHPS) Series to Colombia Manufacturers, The product will supply to all over the world, such as: Amsterdam , Argentina , Porto , Our main objectives are to provide our customers worldwide with good quality, competitive price, satisfied delivery and excellent services. Customer satisfaction is our main goal. We welcome you to visit our showroom and office. We are looking forward to establish business relation with you.
Polystar (Taiwan) — Original manufacturer of Two stage plastic recycling machine / email@example.com
Find more info: http://www.polystarco.com/en/products_i_F01_Two_stage_single_screw.html
Polystar, a professional manufacturer of Two stage plastic recycling machine in Taiwan, designs and manufactures Two stage plastic recycling machine based on every customer’s requirement. Polystar Taiwan produces a wide range of Plastic recycling machine, including Two-stage Two stage plastic recycling machine, one-stage Plastic recycling machine, air-cooing, water-cooling recycling machine, die-face-cutting/water-ring-cutting, noodle type cutting recycling machine…
Polystar’s high efficiency, two-step Two stage plastic recycling machine features its cutter compactor system, two-stage extruder, and water ring die-face-cutting system. This cutter compactor system of Two stage plastic recycling machine is integrated with shredder/cutter pelletizing system, which eliminates the need of pre-cutting material, requires less space and energy consumption while producing high quality plastic pellets at a productive rate. The plastic waste will be cut before being fed into the extrusion unit. The primary character of HNT-VS Two stage plastic recycling machine is its two-stage extrusion. The special design with two extruders and filters of Two stage plastic recycling machine makes it specialize in processing wasted material with heavily printed surface and water content. Eventually, the water ring die-face-cutting system of Two stage plastic recycling machine is an upgrade from noodle type cutting system. It provides a stable cutting of material and produces beautiful pellets with even shape.
Polystar Taiwan manufacturers Two stage plastic recycling machine with higher and lower capacity of 80~1000 kg/hr.
This HNT-VS Two stage plastic recycling machine is designed for the reprocessing of PE polyethylene(HDPE, LDPE, LLDPE) and PP polypropylene flexible packaging material, printed and non-printed. Two stage plastic recycling machine is especially a suitable machine for blown film factories to recycle their own in-house waste because the post-industrial waste from blown film factory is usually clean and uncontaminated, which is suitable to be recycled on this Two stage plastic recycling machine. In addition to in-house (post-industrial) film waste, Two stage plastic recycling machine is also able to process washed flakes, scraps and regrind (pre-crushed rigid plastic waste from injection and extrusion). This Two stage plastic recycling machine is highly recommended for packaging film producers of commercial bags, garbage bags, agricultural films, food packaging, shrink and stretch films, as well as producers in the woven industry of PP woven bags, jumbo bags, tapes and yarns. Other types of material such as PS sheet, PE and PS foam, PE net, EVA, PP mixed with PU are also applicable on this Two stage plastic recycling machine.
Applicable material for Two stage plastic recycling machine:
Condition of heavily printed or much water content
HDPE/LDPE edge trim waste
PP waste bag
T-shirt bag cut off
PP raffia/woven sack
Two stage plastic recycling machine produces high quality reusable pellets. The produced pellets from Two stage plastic recycling machine can be put directly back to the production line, mostly blown film or pipe extrusion processes.
Polystar Taiwan has sold Two stage plastic recycling machine to Egypt, Russia, Ecuador, Chile, Australia, Malaysia, Japan and many other countries around the world for over 25 years.
Send your inquiry for Two stage plastic recycling machine to: firstname.lastname@example.org
Find more info about Two stage plastic recycling machine on: http://www.polystarco.com/en/products_i_F01_Two_stage_single_screw.html
Two stage plastic recycling machine — Model HNT-VS
Polystar (Taiwan) — Original manufacturer of Two stage plastic recycling machine
By Cara from Portugal - 2015.12.10 19:03
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Anna from Hongkong - 2016.12.19 11:10